Transocean coatings logo

Transolac Aluminium HR (TO 5.11)

Colour: Silver
Gloss / Appearance: Gloss
Volume solids: Approx. 35 %
Aluminium based finish suitable for interior and exterior application for steel substrates where heat resistance up to 200 °C is required.
The product can be applied on Transogard priming system but for maximum temperature resistance Transolac Aluminium HR must be applied directly to the steel.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transolac Aluminium HR (TO 5.11) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transolac Aluminium HR (TO 5.11) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transolac Aluminium HR (TO 5.11) English
Product datasheet
Product Datasheet Transolac Aluminium HR (TO 5.11) English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Masterbond 94.69 Aluminium (TO 94.69)

Colour: Aluminium
Transpoxy Masterbond 94.69 Aluminium: a modified polyamide cured mastic epoxy surface tolerant anti-corrosive primer/coating

Transpoxy Guard 475

Colour: White , Light grey , Redbrown , selected other colours
Transpoxy Guard 475, high build polyamine epoxy coating for steel and concrete, potable water tanks (AS/NZS 4020: 2018), complies to ISO 12944-6 Im2 and Im3

Transoprime 9182 (TO 91.82)

Colour: Grey , Redbrown , selected other colours

Transolac Aluminium (TO 3.11)

Colour: Aluminium (Silver)

Transoplate Epoxy Primer (TO 1.57)

Colour: Red
A two pack epoxy shop primer for the protection of steel structures against corrosion (up to weathering periods of 6 months) during construction.

Transoweld Primer (TO 1.56)

Colour: Grey, Redbrown
A highly durable ethylsilicate shop primer with reduced zinc content for an optimal balance between welding speed and corrosion protection.