Transpoxy Masterbond BT (TO 4.68)

Colour: Grey , Redbrown , Aluminium , selected other colours
Gloss / Appearance: Semi-gloss
Volume solids: 78%
Transpoxy Masterbond BT is a high solids primer/coating with excellent anticorrosive properties under severe corrosive conditions.
The product has an increased tolerance to damp substrates and can be used at temperatures down to 0°C. Transpoxy Masterbond BT offers good adhesion to blast cleaned steel, weathered (shop) primers as well as a variety of aged coatings. In maintenance conditions it tolerates a lower degree of surface preparation and can be used in combination with mechanical power tooling or high pressure water jetting as surface preparation. Due to its phenolic functional epoxy-amine crosslinking, the products offers good chemical resistance against various fuels and hydrocarbons.
The product carries various (system) approvals from oil companies and is an approved coating according to IMO-PSPC for usage in Crude Oil – and Ballast tanks.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy Masterbond BT (TO 4.68) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Masterbond BT (TO 4.68) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transocean Masterbond BT (TO 4.68) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.