Transocean coatings logo

Transpoxy Masterbond BT (TO 4.68)

Colour: Grey , Redbrown , Aluminium , selected other colours
Gloss / Appearance: Semi-gloss
Volume solids: 78%
Transpoxy Masterbond BT is a high solids primer/coating with excellent anticorrosive properties under severe corrosive conditions.
The product has an increased tolerance to damp substrates and can be used at temperatures down to 0°C. Transpoxy Masterbond BT offers good adhesion to blast cleaned steel, weathered (shop) primers as well as a variety of aged coatings. In maintenance conditions it tolerates a lower degree of surface preparation and can be used in combination with mechanical power tooling or high pressure water jetting as surface preparation. Due to its phenolic functional epoxy-amine crosslinking, the products offers good chemical resistance against various fuels and hydrocarbons.
The product carries various (system) approvals from oil companies and is an approved coating according to IMO-PSPC for usage in Crude Oil – and Ballast tanks.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy Masterbond BT (TO 4.68) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Masterbond BT (TO 4.68) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transocean Masterbond BT (TO 4.68) English
Product datasheet
Product datasheet Masterbond BT (TO 4.68) English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Guard 475

Colour: White , Light grey , Redbrown , selected other colours
Transpoxy Guard 475, high build polyamine epoxy coating for steel and concrete, potable water tanks (AS/NZS 4020: 2018), complies to ISO 12944-6 Im2 and Im3

Transoprime 9182 (TO 91.82)

Colour: Grey , Redbrown , selected other colours

Transolac Aluminium (TO 3.11)

Colour: Aluminium (Silver)

Transoplate Epoxy Primer (TO 1.57)

Colour: Red
A two pack epoxy shop primer for the protection of steel structures against corrosion (up to weathering periods of 6 months) during construction.

Transoweld Primer (TO 1.56)

Colour: Grey, Redbrown
A highly durable ethylsilicate shop primer with reduced zinc content for an optimal balance between welding speed and corrosion protection.

Transozinc HS (TO 1.85)

Colour: Grey
A two pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments.