Transocean coatings logo

Transvinypox (TO 2.06)

Colour: Grey , Redbrown , selected other colours
Gloss / Appearance: Egg Shell
Volume solids: Approx. 45 %
A two-pack, modified epoxy designed as a tiecoat or sealer on epoxy anticorrosive systems in order to improve the adhesion of subsequent antifouling systems. It offers a very long recoating window with single-pack and 2-pack finishes and therefore can be used in marine paint systems above and below the waterline. It can also be used as a sealer on old and polished through antifouling system as the product provides good compatibility with various antifouling systems.
Transvinypox has excellent flexibility and adhesion to a variety of substrates such as aluminium, galvanized steel, wood and glass fibre reinforced polyester.
The product cures down to temperatures of 0°C and tolerates a lower degree of surface preparation.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transvinypox (TO 2.06) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transvinypox (TO 2.06) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transvinypox (TO 2.06) English
Product datasheet
Product datasheet Transvinypox (TO 2.06) English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Masterbond 94.69 Aluminium (TO 94.69)

Colour: Aluminium
Transpoxy Masterbond 94.69 Aluminium: a modified polyamide cured mastic epoxy surface tolerant anti-corrosive primer/coating

Transpoxy Guard 475

Colour: White , Light grey , Redbrown , selected other colours
Transpoxy Guard 475, high build polyamine epoxy coating for steel and concrete, potable water tanks (AS/NZS 4020: 2018), complies to ISO 12944-6 Im2 and Im3

Transoprime 9182 (TO 91.82)

Colour: Grey , Redbrown , selected other colours

Transolac Aluminium (TO 3.11)

Colour: Aluminium (Silver)

Transoplate Epoxy Primer (TO 1.57)

Colour: Red
A two pack epoxy shop primer for the protection of steel structures against corrosion (up to weathering periods of 6 months) during construction.

Transoweld Primer (TO 1.56)

Colour: Grey, Redbrown
A highly durable ethylsilicate shop primer with reduced zinc content for an optimal balance between welding speed and corrosion protection.