Transocean coatings logo

Transvinypox HS (TO 2.06HS)

Colour: Grey, selected other colours
Gloss / Appearance: Flat
Volume solids: Approx. 77 %
A two-pack, modified epoxy with excellent flexibility and adhesion. The product enhances the barrier properties of anticorrosive system and provides an excellent key for recoating with all type of finishes which includes all Transocean antifouling systems.
When combined with Transpoxy Masterbond as primer, it offers a full anticorrosive system suitable to be used from keel to rail. The product can also be used as a single coat protective system for interior areas.
As such, the product has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transvinypox HS (TO2.06HS) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transvinypox HS (TO 2.06HS) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transvinypox HS (TO 2.06HS) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Test product

Colour: Light grey , White , Redbrown , Green , selected other colours
product test, to see where PDS ends up

Transpoxy HB (TO 4.73)

Colour: Light grey , White , Redbrown , Green , selected other colours
A polyamine cured epoxy coating for ballast tanks, cargo holds, hulls, splash zone areas.

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.