Transvinyl Primer (TO 1.48)

Colour: Red , Grey , Silver
Gloss / Appearance: Flat
Volume solids: Approx. 40 %
A vinyl based tar free primer. It can be used as a tiecoat on Transpoxy systems to improve the adhesion of subsequent systems or as an anticorrosive system on itself. Transvinyl Primer can also be used as a sealer of old antifouling layers. The primer is compatible with all Transocean antifouling systems and complies with the IMO Antifouling system convention (AFS/CONF/26) as a sealer coat.
When combined with Transacryl Finish, Transvinyl Primer has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Transvinyl Primer (TO 1.48) Türkçe
Product Datasheet Turkish – Ürün Veri Sayfası Türkçe
Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transvinyl Primer (TO 1.48) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transvinyl Primer (TO 1.48) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transvinyl Primer (TO 1.48) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.