Transocean coatings logo

Transpoxy Sealer (TO 1.99)

Colour: White
Gloss / Appearance: Semi-gloss
Volume solids: Approx. 50 %
Transpoxy Sealer is a two-pack polyamide cured epoxy coating suitable for atmospheric and immersion conditions.
The product is used typically used as a tiecoat on inorganic zinc silicates and as an intermediate coat in Transpoxy systems.
It is also suitable to prime constructions prepared from glass fibre reinforced polyester (GRP) such as tanks and yachts.
Transocean coatings can

Important documents

Guidance to paint application
Prevent problems at the start by reading through our application guidance.
Transpoxy Sealer (TO 1.99) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Sealer (TO 1.99) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transpoxy Sealer (TO 1.99) English
Product datasheet
Product Datasheet Transpoxy Sealer (TO 1.99) English
Guidance to Product Data Sheets
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Guard 475

Colour: White , Light grey , Redbrown , selected other colours
Transpoxy Guard 475, high build polyamine epoxy coating for steel and concrete, potable water tanks (AS/NZS 4020: 2018), complies to ISO 12944-6 Im2 and Im3

Transoprime 9182 (TO 91.82)

Colour: Grey , Redbrown , selected other colours

Transolac Aluminium (TO 3.11)

Colour: Aluminium (Silver)

Transoplate Epoxy Primer (TO 1.57)

Colour: Red
A two pack epoxy shop primer for the protection of steel structures against corrosion (up to weathering periods of 6 months) during construction.

Transoweld Primer (TO 1.56)

Colour: Grey, Redbrown
A highly durable ethylsilicate shop primer with reduced zinc content for an optimal balance between welding speed and corrosion protection.

Transozinc HS (TO 1.85)

Colour: Grey
A two pack polyamide cured epoxy primer pigmented with a high zinc content for the protection of steel structures against corrosion in industrial and marine environments.