Transocean coatings logo

Transpoxy Masterbond N-FF (TO 4.67NFF)

Colour: Grey, Redbrown
Gloss / Appearance: Semi-gloss
Volume solids: Approx. 82%
A high solids epoxy primer/coating formulated with Masterbond binder technology. Transpoxy Masterbond N-FF has excellent anticorrosive properties and good impact- and abrasion resistance.
The product has good adhesion to approved zinc silicate shop-primers. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings.
When combined with Transocean PU finishes, Transpoxy Masterbond has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy Masterbond FF (TO 4.67FF) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Masterbond FF (TO 4.67FF) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transpoxy Masterbond N-FF (TO 4.67NFF) English
Product datasheet
Product Datasheet Transpoxy Masterbond N-FF (TO 4.67NFF) English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy HB (TO 4.73)

Colour: Light grey , White , Redbrown , Green , selected other colours
A polyamine cured epoxy coating for ballast tanks, cargo holds, hulls, splash zone areas.

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.