Transpoxy Finish 460 (TO 4.60)

Colour: Black , Grey , White , Transocean Colourshades , Other colours upon request
Gloss / Appearance: Gloss
Volume solids: Approx. 60 %
A epoxy topcoat for interior and exterior use. Good resistance against weathering and the spillage of solvents, lubricants and chemicals.
Transpoxy Finish cures to a tough and flexible coating and provides excellent adhesion to Transpoxy priming systems.
When combined with Transpoxy Barrier, Transpoxy Finish has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy Finish 460 (TO 4.60) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Finish 460 (TO 4.60) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transpoxy Finish 460 (TO 4.60) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.