Transocean coatings logo

Transpoxy Barrier 218 (TO 2.18)

Colour: Grey , Redbrown , Aluminium , selected other colours
Gloss / Appearance: Semi-gloss
Volume solids: Approx. 80 %
A high solids epoxy barrier coating with excellent anticorrosive properties and good impact- and abrasion resistance.
Transpoxy Barrier offers good adhesion to St3 prepared steel substrates and compatible with most aged coatings. It can be recoated with various Transocean finishing systems. Transpoxy Barrier is used for protection of steel structures on-shore and offshore where the product is approved in coating specifications.
For marine purposes the product can be used for all vessel areas such as in dry cargo holds where it is certified for grain carriage by Newcastle Occupational Health Agency. The product is exceptionally suitable for use in ballast tanks and is approved according to IMO Resolution MSC.215(82) – (PSPC).
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy Barrier 218 (TO 2.18) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Barrier 218 (TO 2.18) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transpoxy Barrier 218 (TO 2.18) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Test product

Colour: Light grey , White , Redbrown , Green , selected other colours
product test, to see where PDS ends up

Transpoxy HB (TO 4.73)

Colour: Light grey , White , Redbrown , Green , selected other colours
A polyamine cured epoxy coating for ballast tanks, cargo holds, hulls, splash zone areas.

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.