Transocean coatings logo

Transpoxy Barrier 216 (TO 2.16)

Colour: Light grey , Redbrown , selected other colours
Gloss / Appearance: Semi-gloss
Volume solids: Approx. 68 %
A tarfree, polyamide cured epoxy coating with an excellent seawater- and corrosion resistance. The product is high-build and can be applied at 250 micron dry film thickness in a single coat.
Transpoxy Barrier offers good levelling- and wetting properties which enables tolerance to a lower degree of surface preparation.
The product complies with FDA §175.300 for the carriage of dry foodstuffs.
For faster curing at ambient temperatures or at application at temperatures down to 0° C, a special hardener is available.
Transpoxy Barrier has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy Barrier 216 (TO 2.16) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Barrier 216 (TO 2.16) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transpoxy Barrier 216 (TO 2.16) English
Product datasheet
Product Datasheet Transpoxy Barrier 216 English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Masterbond 94.69 Aluminium (TO 94.69)

Colour: Aluminium
Transpoxy Masterbond 94.69 Aluminium: a modified polyamide cured mastic epoxy surface tolerant anti-corrosive primer/coating

Transpoxy Guard 475

Colour: White , Light grey , Redbrown , selected other colours
Transpoxy Guard 475, high build polyamine epoxy coating for steel and concrete, potable water tanks (AS/NZS 4020: 2018), complies to ISO 12944-6 Im2 and Im3

Transoprime 9182 (TO 91.82)

Colour: Grey , Redbrown , selected other colours

Transolac Aluminium (TO 3.11)

Colour: Aluminium (Silver)

Transoplate Epoxy Primer (TO 1.57)

Colour: Red
A two pack epoxy shop primer for the protection of steel structures against corrosion (up to weathering periods of 6 months) during construction.

Transoweld Primer (TO 1.56)

Colour: Grey, Redbrown
A highly durable ethylsilicate shop primer with reduced zinc content for an optimal balance between welding speed and corrosion protection.