Transocean coatings logo

Transozinc Epoxy Primer ST (TO 1.50)

Colour: Green
Gloss / Appearance: Flat
Volume solids: Approx. 50 %
A two pack epoxy primer pigmented with zinc dust for an excellent protection of steel structures against corrosion in industrial and marine environments. The primer is especially recommended when (ultra) high-pressure hydrojetting is utilized as surface preparation and can be applied on damp substrates. As such the product is frequently used for refurbishment of exterior hulls, decks and dry cargo holds.
Transozinc Epoxy Primer ST is available in a regular and LT version, which enables application at lower temperatures (down to -15 °C).
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Download
Transozinc Epoxy Primer ST (TO 1.50) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Download
Transozinc Epoxy Primer ST (TO 1.50) English
Product datasheet
Product Datasheet (English)
Download
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Download
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations
Download

Other products

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.
READ MORE

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved
READ MORE

Transpoxy HB (TO 4.73)

Colour: Light grey , White , Redbrown , Green , selected other colours
A polyamine cured epoxy coating for ballast tanks, cargo holds, hulls, splash zone areas.
READ MORE

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.
READ MORE

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.
READ MORE

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.
READ MORE