Transocean coatings logo

Transozinc Epoxy Primer 173 (TO 1.73)

Colour: Grey
Gloss / Appearance: Flat
Volume solids: Approx. 50 %
A two pack polyamide cured epoxy primer pigmented with a very high zinc content for the protection of steel structures against corrosion in industrial and marine environments. The primer is quick drying and can be used as a holding primer.
The primer complies with the compositional requirements of SSPC-20 Type II, Level 1, ISO 12944: Zinc Rich.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transozinc Epoxy Primer 173 (TO 1.73) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Test product

Colour: Light grey , White , Redbrown , Green , selected other colours
product test, to see where PDS ends up

Transpoxy HB (TO 4.73)

Colour: Light grey , White , Redbrown , Green , selected other colours
A polyamine cured epoxy coating for ballast tanks, cargo holds, hulls, splash zone areas.

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.