Transocean coatings logo

Transogard Rustarrestor (TO 4.16)

Colour: Silver
Gloss / Appearance: Semi-gloss
Volume solids: Approx. 48 %
A modified alkyd based primer/coating pigmented with aluminium flakes.
It has excellent wetting and penetration properties enabling application on substrates where good surface preparation is not possible.
The product has the grain carriage approval by Newcastle Occupational Health Agency.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transogard Rustarrestor (TO 4.16) Français
Product datasheet French – Fiche de données du produit Français
Transogard Rustarrestor (TO 4.16) English
Product datasheet
Product Datasheet Transogard Rustarrestor (TO 4.16) English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transurethane Shield (TO 3.45)

Colour: Transocean Colour shades
A high solids polyurethane coating for all areas above the waterline.

Transpoxy Unicote (TO 4.32)

Colour: Aluminium , Redbrown , Grey
Transpoxy Unicote is a versatile primer/coating for usage in high corrosive conditions onshore and offshore.

Transpoxyl PX 371 (TO 3.71)

Colour: Transocean Colour shades, others on request
A two-pack, high performance, isocyanate-free, high solids epoxy siloxane coating

Transpoxyl PX 370 (TO 3.70)

Colour: RAL Shades
A two-pack, isocyanate-free, high solids, high performance epoxy siloxane coating

Transpoxy Masterbond 94.69 Aluminium (TO 94.69)

Colour: Aluminium
Transpoxy Masterbond 94.69 Aluminium: a modified polyamide cured mastic epoxy surface tolerant anti-corrosive primer/coating

Transpoxy Guard 475

Colour: White , Light grey , Redbrown , selected other colours
Transpoxy Guard 475, high build polyamine epoxy coating for steel and concrete, potable water tanks (AS/NZS 4020: 2018), complies to ISO 12944-6 Im2 and Im3