Transocean coatings logo

Transacryl Finish 353 (TO 3.53)

Colour: Transocean Colourshades
Gloss / Appearance: Gloss
Volume solids: Approx. 45 %
A non-yellowing, acrylic based topcoat with superior adhesion to Transpoxy, Transvinyl and Transoprene anticorrosive systems. The product is easy to apply, dries quickly and offers excellent colour retention.
When combined with Transvinyl Primer, Transacryl Finish has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transacryl Finish 353 (TO 3.53) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transacryl Finish 353 (TO 3.53) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transacryl Finish 353 (To 3.53) English
Product datasheet
Product Datasheet Transacryl Finish 353 English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Masterbond 94.69 Aluminium (TO 94.69)

Colour: Aluminium
Transpoxy Masterbond 94.69 Aluminium: a modified polyamide cured mastic epoxy surface tolerant anti-corrosive primer/coating

Transpoxy Guard 475

Colour: White , Light grey , Redbrown , selected other colours
Transpoxy Guard 475, high build polyamine epoxy coating for steel and concrete, potable water tanks (AS/NZS 4020: 2018), complies to ISO 12944-6 Im2 and Im3

Transoprime 9182 (TO 91.82)

Colour: Grey , Redbrown , selected other colours

Transolac Aluminium (TO 3.11)

Colour: Aluminium (Silver)

Transoplate Epoxy Primer (TO 1.57)

Colour: Red
A two pack epoxy shop primer for the protection of steel structures against corrosion (up to weathering periods of 6 months) during construction.

Transoweld Primer (TO 1.56)

Colour: Grey, Redbrown
A highly durable ethylsilicate shop primer with reduced zinc content for an optimal balance between welding speed and corrosion protection.