Transogard Primer (TO 1.22)

Colour: Grey, Redbrown, White, Aluminium, selected other colours
Gloss / Appearance: Flat
Volume solids: Approx. 50 %
Transogard primer is a high build alkyd primer for an excellent protection of steel structures against corrosion in industrial and marine environments. The product offers good levelling properties and adheres well on powertool prepared substrates.
It can be recoated with Transunilac- and Transacryl Finishes and some cases with two-pack coating systems. Not suitable for constant immersion or recoating of zinc primed steel.
When combined with Transunilac Finish, Transogard Primer has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Transogard Primer (TO 1.22) Türkçe
Product datasheet
Product Datasheet Turkish – Ürün Veri Sayfası Türkçe
Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transogard Primer (TO 1.22) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transogard Primer (TO 1.22) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transogard Primer (TO 1.22)
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets

Other products

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.