Transpoxy MIO Primer 165 (TO 1.65)

Colour: Silvergrey
Gloss / Appearance: Flat
Volume solids: Approx. 55 %
A two-pack polyamide cured epoxy coating pigmented with a high content of micaceous iron oxide resulting in an excellent barrier against penetration of water and water vapour . The product offers good resistance against abrasion and impact.
The product can be used as a primer but is typically used as intermediate coat in Transpoxy systems.
When applied as a full system, the product offers resistance against dry heat up to 200°C.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy MIO Primer 165 (TO 1.65) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy MIO Primer 165 (TO 1.65) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.