Transpoxy Glascote DTM (TO 4.40DTM)

Colour: Red , Light grey , Cream
Gloss / Appearance: Semi-gloss
Volume solids: Approx. 92 %
A high solids glassflake epoxy coating with outstanding corrosion- and impact resistance. Especially suitable for areas facing severe corrosive conditions such as in splash zone areas.
Transpoxy Glascote DTM is approved by latest Petronas specifications for offshore decks and splashzones.
Good chemical resistance and suitable for internal areas in contact with crude/condensate (Sweet & Sour emulsion/Slop), diesel and hydrocarbons.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transopoxy Glascote DTM (TO 4.40DTM) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Glascote (TO 4.40) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transpoxy Glascote DTM (TO 4.40DTM) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.