Transozinc Silicate 152 (TO 1.52)

Colour: Grey
Gloss / Appearance: Flat
Volume solids: Approx. 55 %
A moisure curing inorganic zinc silicate with optimized zinc dust content for an excellent protection of steel structures against corrosion in industrial and marine environments. The product consist of a binder and zinc paste making it more easier to mix as well as safer to use by the applicators.
Transozinc Silicate complies with SSPC-20 Type I, Level 1, ISO 12944: Zinc Rich. It can be recoated with various Transpoxy series as well as Transosil- and Transotherm series.
The product offers heat resistance continuously upto 400 °C and intermittent upto 540 °C.
When topcoated with Transpoxy Barrier 218 and Transurethane Shield, Transozinc Silicate has been certified for usage in C5 environment according ISO 12944.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Additional usage instructions Transozinc Silicate 1.52
Additional product info
Additional usage instructions Transozinc Silicate 1.52. Guidance on: storage, application, re-coat
Transozinc Silicate 152 (TO 1.52) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transozinc Silicate 152 (TO 1.52) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transozinc Silicate 152 (TO 1.52) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.