Transpoxy EC Primer (TO 1.42)

Colour: Redbrown
Gloss / Appearance: Flat
Volume solids: Approx. 62 %
A two pack polyamide cured epoxy primer with zincphosphate and auxiliary anti-corrosive pigments for the protection of steel structures against corrosion in industrial and marine environments.
Transpoxy EC primer offers extended recoating times with 2-pack coatings as well as single pack products. The primer can be used down to -10 °C and at high humidity.
Suitable to be used as primer in new constructions but also offers good adhesion to most old, aged coating system such as alkyds, chlorinated rubbers and epoxies, provided they are in sound condition.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy EC Primer (TO 1.42) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy EC Primer (TO 1.42) English
Product datasheet
Product Datasheet Transpoxy EC Primer (TO 1.42)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.