Transpoxy Tankguard 458 (TO 4.58)

Colour: White, light grey, Cream
Gloss / Appearance: Egg shell
Volume solids: Approx. 68 %
A polyamine cured phenolic epoxy coating with good resistance to various chemicals such as hydrocarbons, crude oils and fuels. The product offers good dry heat resistance (upto 220 °C) and can cope with thermal shock cycles. Transpoxy Tankguard 458 is especially suitable for protection of storage tanks containing hot crude oils.
The product is self-priming but can be used in combination with suitable chemical resistant primers such as Transpoxy Tankguard 118.
Transpoxy Tankguard 458 is compatible with properly installed cathodic protection and as such passed testing requirments of Norsok system 7C. It meets specifications of El 1541-2016 (resistance to aviation fuels) as well as DEF STAN 80-97 Issue 5 and corresponding Mil Spec references such as Mil Spec 4556.
Transocean coatings can

Important documents

Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transpoxy Tankguard 458 (TO 4.58) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transpoxy Tankguard 458 (TO 4.58) English
Product datasheet
Product Datasheet Transpoxy Tankguard 458 English
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.