Transocean coatings logo

Transvinypox FF (TO 2.06FF)

Colour: Grey, selected other colours
Gloss / Appearance: Flat
Volume solids: Approx. 68 %
A two-pack, modified epoxy with excellent flexibility that can be used at all seasons. The product enhances the barrier properties of anti-corrosive system and provides an excellent key for re-coating with all type of finishes which includes all Transocean antifouling systems.
When combined with Transpoxy Masterbond as primer, it offers a full anticorrosive system suitable to be used from keel to rail.
The product can also be used as a single coat protective system for interior areas. As such, the product has low spread of flame properties and is certified to comply with MED-Module B in the Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code.
Transocean coatings can

Important documents

Transvinypox FF (TO 2.06FF) Türkçe
Product Datasheet Turkish – Ürün Veri Sayfası Türkçe
Guidance to paint application
Prevent problems at the start by reading through our application guidance.
Transvinypox FF (TO 2.06FF) Français
Product datasheet
Product datasheet French – Fiche de données du produit Français
Transvinypox FF (TO2.06FF) Español
Product datasheet
Product datasheet Spanish – Hoja técnica Español
Transvinypox FF (TO 2.06FF) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Introduction to reading & interpreting product information in Transocean Coatings product datasheets

Other products

Test product

Colour: Light grey , White , Redbrown , Green , selected other colours
product test, to see where PDS ends up

Transpoxy HB (TO 4.73)

Colour: Light grey , White , Redbrown , Green , selected other colours
A polyamine cured epoxy coating for ballast tanks, cargo holds, hulls, splash zone areas.

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.

Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae.

Transocean Cleanship 291 AU (TO 2.91AU)

Colour: Black, Blue, Redbrown
A tinfree polishing antifouling based on specially developed mixture of polymers, approved by Australian Pesticides and Veterinary Medicines Authority.