Transpoxy Unicote (TO 4.32)

Colour: Aluminium , Redbrown , Grey
Gloss / Appearance: Semi-gloss
Volume solids: Approx. 68 %
Transpoxy Unicote is a versatile primer/coating for usage in high corrosive conditions onshore and offshore. It offers all round chemical resistance and provides good impact- and abrasion resistance. The product can be used down to -5°C.
Transocean coatings can

Important documents

Transpoxy Unicote (TO 4.32) English
Product datasheet
Product Datasheet (English)
Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.