Transocean Optima 234 (TO 2.34)

Colour: Redbrown, Pink, Pink, Black
Gloss / Appearance: Flat
Volume solids: Approx. 60 %
A tinfree, self erodable antifouling pigmented with a combination of biocides for the protection of the underwater hull of vessel against various types of fouling organisms such as barnacles and algae. Typically offers protection up to 18 months in areas with moderate fouling pressure. Extended protection periods may be achieved in areas with a lower degree of fouling activity. The product can be applied on all Transocean anticorrosive systems. Product complies to IMO Antifouling System Convention compliant (AFS/CONF/26).
Transocean coatings can

Important documents

Transocean Optima 234 (TO 2.34) Türkçe
Product datasheet
Product Datasheet Turkish – Ürün Veri Sayfası Türkçe
Transocean Optima 234 (TO 2.34) English
Product datasheet
Product Datasheet (English)
Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations

Other products

Transpoxy Barrier 9216

Colour: Grey, Redbrown
Tarfree, polyamide cured epoxy coating with excellent seawater- and corrosion resistance, tolerance to a lower degree of surface preparation.

Transocean Cleanship 297

Colour: Black, Blue, Pink, Redbrown
A tinfree polishing antifouling, suitable for coastal vessels sailing at slow speeds or vessels trading in coastal waters.

Transpoxy Resin System 7900 (TO 4.42)

Colour: Transparent
A two pack transparent epoxy coating system for white/refined oil products or crude oil bulk storage tanks.

Transurethane Finish PUF 3060 (TO 3.46)

Colour: Transocean Colourshades
Polyurethane topcoat for atmospheric areas, Petronas approved

Transpoxy Unicote BT (TO 4.33)

Colour: Aluminium, Light grey, Redbrown, Cream
Surface tolerant epoxy for high corrosive conditions onshore and offshore, suitable for use in water ballast tanks.

Transothane Finish (TO 3.63)

Colour: Transocean Colourshades
A high gloss polyurethane finish for marine- and industrial environments.